Taitong 12W RGBCW LED Driver
For commercial and specialist applications. Built-in algorithms bring out the full capability of the light source: significantly better colour rendering, precise black-body-line tracking and a close match to natural light. Communication is over Bluetooth — no signal wiring or complex addressing — so configuration is straightforward. The device connects directly to the phone app or works alongside other Bluetooth devices, supporting single-device, group and scene-cluster control. This driver matches the Zhonghao RGBCW 1814 and 1916 light-source series by default. With third-party luminaires, make sure the driver output voltage and current match — an ordinary light source only gives mixed output and cannot deliver the full-spectrum effect. Getting the best full-spectrum result requires secondary optimisation for that specific light source.
Specifications
| Model | IN-A5H-GEN-H2 |
|---|---|
| Output Parameters | Output voltage 30–40V; operating current C/W 0–300mA, RGB 0–150mA; load power 0–12W; dimming 1%–100%; flicker-free; PWM 1–12kHz; ripple & noise 1V |
| Input Parameters | Input current 0.16A @176V full load; power factor >0.5 @220V full load; inrush 30A; leakage 0.5mA |
| Environmental Parameters | Operating -20℃ to 40℃; humidity 10%–95%; storage -20℃ to 60℃ / 10%–95% RH; vibration >GB/T 4857.23 |
| Protection | Over-voltage: yes; overload: yes; over-temperature: yes; short-circuit: yes |
| Safety & EMC | Dielectric strength 3750V / 1 min; safety GB19510, CCC; EMC emission/immunity GB17743; flicker test YEN61000 |
| Other | Dimensions 137×46×27mm, weight 97.5g |
Related Products
Taitong Dual-White 12W LED Driver (IN-BLE-DR12D)
For domestic and commercial installations that need scene control and independent luminaire control. Communication is over Bluetooth — no signal wiring or complex addressing — so configuration is straightforward. The device connects directly to the phone app or works alongside other Bluetooth devices, supporting single-device, group and scene-cluster control. Third-party light sources are supported — when using them, make sure the driver output voltage and current match the luminaire.
Taitong DR15S LED Driver
For domestic and commercial installations that need scene control and independent luminaire control. The driver is compact, dims smoothly and supports deep dimming with fine step values. Its twin-cable output suits small, low-voltage luminaires. Communication is over Bluetooth — no signal wiring or complex addressing — so configuration is straightforward. The device connects directly to the phone app or works alongside other Bluetooth devices, supporting single-device, group and scene-cluster control. Third-party light sources are supported — when using them, make sure the driver output voltage and current match the luminaire.
Taitong Dual-White 40W LED Driver
For domestic and commercial installations that need scene control and independent luminaire control. Communication is over Bluetooth — no signal wiring or complex addressing — so configuration is straightforward. The device connects directly to the phone app or works alongside other Bluetooth devices, supporting single-device, group and scene-cluster control. Third-party light sources are supported — when using them, make sure the driver output voltage and current match the luminaire.
Taitong DR13S LED Driver
For domestic and commercial installations that need scene control and independent luminaire control. The smallest dual-white Bluetooth surface-mount circular driver in the industry, made for unusual installation constraints. Small enough to fit inside the luminaire, with smooth deep dimming. Communication is over Bluetooth — no signal wiring or complex addressing — so configuration is straightforward. The device connects directly to the phone app or works alongside other Bluetooth devices, supporting single-device, group and scene-cluster control. Third-party light sources are supported — when using them, make sure the driver output voltage and current match the luminaire.